Our silicone molds may be used for molding hot and cold processed soaps as well as melt and pour soap bases. They are heavy-duty soap molds that can be used over and over again; they are tough and made to last.
Usage: Do not overfill as this will make it difficult to release the soap from the mold. After it has set, apply gentle but constant pressure with your thumbs at the back of the mold until the soap releases. If necessary, this process can be helped by chilling your mold in the freezer for 5 to 10 minutes.
IMPORTANT: All New Directions Aromatics (NDA) products are for external use only unless otherwise indicated. This information is not intended to diagnose, treat, cure, or prevent any disease, and it should not be used by anyone who is pregnant or under the care of a medical practitioner. Please refer to our policies for further details, and our disclaimer below.
Be Heard! Review this product and win $100.
Write a review and you can win $100 Shopping Credit!
In the beginning of every month we will have a random draw from all the reviews that came in the previous month. Each review entry counts, so write often!
Rating: This is the only mold we use, and own 36 of them. I would give 5 starts, except, this mold keeps increasing in price and is no longer a good value. especially since one needs to buy 2000+ to get a better discount from NDA. This is too bad as we need more and will source out a new supplier for them.
Rating: This is an excellent product.
I highly recommend it.
No lining required.
Soap pops out easily and hardly any residual to clean!
By:Jennifer, Perth-Andover, New Brunswick
Date: Loyal Customer Since: 31-Oct-2016
I used this to make two different M&P soaps and both slid out nice and easy and had a great shape. The loaf tray kept its shape and did not warp or bulge when I poured the soap in.
I also used this to make a batch of moisture lotion bars and it performed just as well as when I used it for the M&P soap!
By:Cindy, Richmond Hill, Ontario
Date: Loyal Customer Since: 07-Dec-2013
Rating: If you are going to be making small batches of soap on a regular basis, it is well-worth getting this mold (I have two). I use it for hot process soaps and it works great. I find it does bow a bit in the middle, but I prop it up on either side while the soap is cooling and it is fine. Removing the block from the mold is straight-forward (I have not found it necessary to freeze it). Yes, you can make your own molds, but for the price and ease of use, this mold is worth it. Get this mold and then find a good cutter and together they will give you consistent shaped bars of soap and save you hassles down the line.
Rating: I can tell how great this silicon tray mold in terms of its quality and its shape by just looking at the picture. However, it's too big for a beginner like me. I am looking for the same one but in a smaller size, the one in 4 inches long. I saw it online selling by a supplier in the States. I wish NDA would carry this 4" silicon tray molds, so I can buy it here. I believe there's a market for it.
By:Shanel, Ottawa, Ontario Top ReviewerDate: Loyal Customer Since: 04-Mar-2015
Rating: Great mold. The brick of soap comes out a perfect rectangle and the ends are so smooth and uniform that we don't have to make end trimmings. My only concern is that when the mold is fully loaded it does bow very slightly in the centre. This is fixed pretty easily with a towel wrapped around (which we do to insulate anyway) or with a can of pop on each side of the mold.
Rating: This is one of my favorite molds. It has nice straight edges, doesn't bow out and releases easily. It's exactly what I needed!
By:Shannon, Oshawa, Ontario Top ReviewerDate: Loyal Customer Since: 09-Jan-2014
Rating: This mold is very nice to work with, it is sturdy and the soap is moulded very nicely with straight edges and a smooth finish. I also found it very easy to remove my soap. This mold is reasonably priced and I would definitely purchase another one from New Directions.
Rating: This mold is great. It is sturdy and the soap comes out easily.
I have been looking for a mold like this for a long time.
By:Kathy, Calgary, Alberta
Date: Loyal Customer Since: 26-Feb-2012
PLEASE NOTE: The packaging shown above is a general representation of the various sizes and types of packaging available for this product. Not all sizes and types of packaging for this product may be available at all times.
Customers may purchase products from New Directions Aromatics Inc. only with the clear understanding that all products must be used at their own discretion, and only after referring to the Material Safety Data Sheets (MSDS) and all other relevant technical information specific to the product. New Directions Aromatics Inc. shall not be held responsible for any damages to property or for any adverse physical effects (including injury or bodily harm).
New Directions Aromatics Inc. shall not be responsible for any damages resulting from use of or reliance upon this information. The user of the product is solely responsible for compliance with all laws and regulations applying to the use of the products, including the intellectual property rights of third parties.
The certifications, statements and product descriptions shown on this website are strictly for information purposes only. The information in this document is obtained from current and reliable sources but makes no representation as to its comprehensiveness or accuracy. Nothing contained herein should be considered as a recommendation by New Directions Aromatics Inc. as to the fitness for any use.
Further, New Directions Aromatics is not responsible for the comments made in the customer reviews, nor when products are used in ways not suitable to their purpose (for example, fragrance oils in toothpaste; bath salts in metal containers; additives used in larger amounts than recommended).
As with any manufacturing process, New Directions Aromatics strongly recommends small lab scale testing for evaluation purposes prior to full commercial manufacturing. As the ordinary or otherwise use(s) of this product is outside the control of New Directions Aromatics Inc., no representation or warranty, expressed or implied is made as to the effect(s) of such use(s) (including damage or injury), or the results obtained.
The liability of New Directions Aromatics Inc. is limited to the value of the goods and does not include any consequential loss. New Directions Aromatics Inc. shall not be liable for any errors or delays regarding an order, or for any actions taken in reliance thereon.
Please note, the International Federation of Aromatherapists do not recommend that Essential Oils be taken internally unless under the supervision of a Medical Doctor who is also qualified in clinical Aromatherapy. In addition, Essential Oils must be properly diluted before use in order to avoid any damages to property or adverse physical effects (including injury or bodily harm).